3D Printing¶
The BugBot chassis is made up of several 3D-printed parts. No support material is needed for any of them.
STL files coming soon
The STL files will be linked here once they are published. In the meantime, contact the BugBotLab team if you need them.
Parts to print¶
| Part | Qty | STL | Notes |
|---|---|---|---|
| Base plate | 1 | coming soon | Main chassis floor |
| Motor mount × 4 | 4 | coming soon | One per motor |
| PCB standoff plate | 1 | coming soon | Holds the carrier PCB |
| Camera bracket | 1 | coming soon | Forward-facing mount for OV5640 |
| ToF bracket | 1 | coming soon | Forward-facing mount for VL53L5CX |
| Top cover (optional) | 1 | coming soon | Protects electronics |
Recommended print settings¶
| Setting | Value |
|---|---|
| Material | PLA or PETG |
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | None required |
| Bed adhesion | Brim recommended for motor mounts |
Next steps¶
Once all parts are printed, move on to assembly.