Parts List (Board Only)¶
If you already have a Seeed Studio XIAO ESP32-S3 Sense, this is everything else you need to build a complete BugBot.
You will also need to 3D print the chassis parts — no other fabrication is required, and no soldering.
Electronics¶
Links coming soon
Purchase links will be added here. Quantities and part numbers are listed so you can search in the meantime.
| Part | Qty | Notes |
|---|---|---|
| Seeed Studio XIAO ESP32-C3 | 1 | The wireless dongle — plugs into your PC over USB |
| BugBot PCB | 1 | Custom carrier board — available separately |
| DC geared motors (TBD) | 4 | |
| Motor driver board (TBD) | 1 | TB6612FNG-based |
| LiPo battery (TBD mAh, TBD S) | 1 | |
| Battery connector / cable | 1 | |
| VL53L5CX breakout (if not on PCB) | 1 | ST 8×8 ToF ToF |
Fasteners and hardware¶
| Part | Qty | Notes |
|---|---|---|
| M? × ?mm screws (TBD) | ? | Chassis assembly |
| M? standoffs (TBD) | ? | PCB mounting |
| M? nuts (TBD) | ? |
Sizes coming soon
Exact screw sizes and lengths will be confirmed once the chassis design is finalised.
Tools you will need¶
- Small Phillips screwdriver
- Computer with Python 3.9+ for firmware setup